Product DescriptionMT-600 AM is a series of polyester based powder coatings, formulated with th
Email:services@moutainchem.com
MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environment, offering the benefits of MT- 600 in combination with specific antimicrobial activity. MT- 600 AM powders are available in a wide range of colours in gloss, satin, matt, metallic and textured effects and can be custom matched to the user’s requirements.
| Chemical type | Polyester – TGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.8 g/cm³ depending on colour |
| Color | Grey |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule (object temperature) | 15 minutes at 190°C 10 minutes at 200°C 8 minutes at 210°C |
| Flexibility | ISO 6860 (Conical Mandrel) | Pass 3 mm |
| Adhesion | ISO 2409 (2mm Crosshatch) | Gt 0 |
| Erichsen Cupping | ISO 1520 | Pass 7 mm |
| Hardness | ISO 1518 (2000g) | Pass – no penetration to substrate |
| Impact | ISO 6272 | 50 kgcm |
| Salt Spray | ISO 7253 (250 hours) | Pass – no corrosion creep more than 2mm from scribe |
| Cyclic Humidity | ISO 6270-1 (1000 hours) | Pass – no blistering or loss of gloss |
| Distilled Water Immersion | ISO 2812 (240 hours) | Pass – no blistering or loss of gloss |
| Exterior Durability | Excellent – non chalking, slight loss of gloss after 12 months continuous exposure but no film breakdown or reduction in protective properties | |
| Chemical Resistance | Generally excellent resistance to most acids, alkalis and oils at normal temperatures | |
| Colour Stability at Elevated temperatures | Excellent for continuous exposure up to 150°C. | |
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
MT-600 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
