Blue Sand Texture Powder Coating

What is Powder Coating?

Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.

Most powder coating is used by electrostatic spraying on metal surface, and then cure in oven, eventually form a solid layer.

POWDER SYSTEM

Epoxy/Epoxy polyester/Polyurethane

APPLICATION AREA

Aluminium Profile Industry   ; Windows and doors

Outdoor or indoor Furniture ; Architecture Construction

Domestic Appliance

PRODUCT FEATURES

• Wide color range ; No clear topcoat requirement
• High Mechanical Resistance ; Different gloss options
• Different Texture Options。

Product Specification

STORAGE

1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%

2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.

3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.

4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.