Weather-resistant matte powder coating

Product descriptionThis series of products uses saturated polyester resin and acrylic resin as

Content

Product description

This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting powder coating.

Product characteristics

The gloss can reach 2-5% (60°), soft and pleasing to the eye;
Good fluidity, smooth and delicate appearance and feel;
Suitable for long-term outdoor use;
Good adhesion and good impact resistance;
Good baking yellowing resistance;
Reasonable price and low cost.

Application areas

1. Outdoor lamps;

2. Courtyard leisure facilities;

3. Building materials;

4. Aluminum ceilings and profiles;

5. Other outdoor low-gloss coatings.

Transportation packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hygiene and safety

Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Powder properties

Specific gravity	1.4~1.8g/cm’ (depending on the formula and color)
Particle size	Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%.
Storage stability	Outdoor matte powder coatings should be stored in a dry, ventilated room below 30°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used.

Film properties

Test items	Inspection standard or method	Inspection index
Appearance	Visual inspection	Various board surface effects
Impact	GB/T 1732	≥50Kg·cm
Bending	GB/T 6742	≤2mm
Cupping	GB/T 9753	≥8mm
Hardness	GB/T 6739	≥H~2H
Adhesion	GB/T 9286	Level 0
Neutral salt spray resistance	GB/T 1771	500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality
Moisture and heat resistance	GB/T 1740	500h No abnormality
Artificial weather aging resistance	GB/T 1865	800h; Discoloration ≤2 level; Gloss loss ≤2 level
The above coating performance indicators may decrease slightly as the gloss decreases.
Spraying	This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating.
Spraying	Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns.
Curing conditions	200℃/15 minutes is recommended, and it can also be designed according to user needs:180℃/15min etc.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.

prev：Durable polyester powder coatings

next：Weather-resistant powder coating for coils