Anodized Powder Coating

Introduction：

It is suitable for anodic oxidation effect for product appearance, as well as environmental protection requirements such as Rohs and Reach.

Coating characteristics :

Good adhesion, excellent mechanical properties, tough coating film.

Coating film is Smooth and glossy

Good outdoor endurance

Excellent resistance to excessive baking

Application:

Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc

Spraying method:

high voltage electrostatic sprayin 60-80KV

Recommended film thickness:

60-80 um

Application parameters

Curing time

200Cx10–15mins

Standard Test Method For Itemizer：

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of .the film would change slightly with different gloss.

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements.

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re -examined to be in good condition even if it is found to be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance commitment of the product application.

The results vary with environmental factors and other conditions.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.